FPV Freestyle Drone Parts: SoloGood F722 Flight Controller Stack

The SoloGood F722 StackInput voltage supports 3-6S Lipo batteries, with a maximum of 26V. The installation hole size is 30.5*30.5mm, with an M3 screw size. The flight controller supports DShot600/300 protocols and weighs 23g.

The F722 flight controller's main control is an STM32F722RET6 chip, and it features an ICM42688P gyroscope and a DPS310 barometer. The OSD is supported by an AT7456E chip, and the BEC provides 10V/2A and 5V/2A output.

The F722 has six UART ports and onboard black box with 16M flash memory. It supports up to eight motors, with firmware named BETAFLIGHT: SOLOGOODF722.

The SoloGood BLS60A 4in1 ESC has a firmware of BLHELI-S: J-H-30-16.7, with a continuous current of 55A and a maximum current of 60A. It supports DSHOT300/600 protocols and operates on 3-6S input voltage.

The ESC features a galvanometer, TVS diode protection, and a 1000uF high-frequency electrolytic capacitor. It uses high-performance Toshiba MOS and has a 30.5x30.5mm installation hole position, measuring 41.5mm x 42mm and weighing 15g.

The F722 flight controller stack can support up to 8 motor outputs, making it suitable for building X8 drones. It has an integrated 5V/10V dual BEC to ensure stable operation. The four LED status indicators display the working status under different states.

Despite its small size, the F722 flight controller has all five internal components: the main control chip, onboard OSD chip, barometer, and onboard black box chip. The use of large pads ensures that the pads are kept away from components, making it easy for beginners to solder the connections perfectly.

product information: